Zone 7" Radius Arm Suspension Lift Kit 4.5" Rear Block - Fox Shocks - ZONF128F

Zone Offroad

Zone Offroad now offers 7" radius arm lift kits for the 2023-2024 Ford F250/F350 Super Duty Gas 4WD trucks. These new 7" lift kits are designed to be complete with everything needed to properly lift your new Super Duty to allow clearance for up to 37" tires. As with all Zone lift kits, these kits are backed by Factory Protection Plus, the comprehensive extended warranty giving you peace of mind on or off the road with a 5-year, 60,000-mile drivetrain warranty and Zone Offroad's limited lifetime warranty.

Features & Benefits:

Heavy duty fabricated steel radius arms that correct caster alignment while maximizing ground clearance
Forged pitman arm to correct steering angles
Heavy duty fabricated track bar relocation bracket to recenter the front axle
Full length specific coil springs which are gas or diesel specific

Associated Comments:

37x12.50 tires may require minor trimming. Factory wheels fit when paired with factory / original equipment tire size. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. When adding the Dual Stabilizer option you will get the dual opposing steering stabilizer in addition to the single OE Replacement. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models; Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, Zone recommends to have this performed prior to installing the lift.

Additional Attributes:

GTIN: 00810156368233
Adjustable: No
Finish: Powdercoat
Front Lift Height: 7"
Front Lift Method: Coil Springs
Installation Difficulty: Moderate (3 out of 5)
Installation Time: 4-6
Material: Steel
Rear Lift Height: 4.5"
Rear Lift Method: Block
Requires Metal Cutting: No
Requires Welding: No

Extended Information:

Emissions : 1
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

F1614-ins

$1,700.99

(No reviews yet) Write a Review

SKU:: FQMS-ZONF128F
UPC:
Weight:: 275.00 Ounces
Shipping:: Calculated at Checkout

Current Stock:

Quantity:

Adding to cart… The item has been added

Description

Features & Benefits:

Heavy duty fabricated steel radius arms that correct caster alignment while maximizing ground clearance
Forged pitman arm to correct steering angles
Heavy duty fabricated track bar relocation bracket to recenter the front axle
Full length specific coil springs which are gas or diesel specific

Associated Comments:

37x12.50 tires may require minor trimming. Factory wheels fit when paired with factory / original equipment tire size. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. When adding the Dual Stabilizer option you will get the dual opposing steering stabilizer in addition to the single OE Replacement. Due to taller factory ride height, Tremor models will not net full advertised lift height. Final ride height will be the same as standard models; Some trucks with a rear driveline vibration may have a recall from Ford regarding the rear axle. (Safety Recall 21S31) Due to the recall procedure, Zone recommends to have this performed prior to installing the lift.