C2552-ins
To properly lift the Colorado/Canyon suspension 5.5", we started with ductile cast iron steering knuckles that reposition critical steering and control arm mounting locations, and work in harmony with the heavy-duty, fabricated crossmembers. Differential drop brackets lower and reposition the front differential for correct CV shaft angles and still allow for use of the factory front driveshaft with the help of a spacer that helps retain optimum CV joint positioning. A full-width differential skid plate protects the relocated differential from the underside and ties the front and rear crossmembers together. Factory struts are retained and relocated with top spacers to gain a full 5.5" of lift without requiring any strut disassembly and that position the struts to eliminate binding through wheel travel. In the rear, a new block and U-bolt kit provided 4" of lift to level out the rear with the front. Extended sway bar links, bump stop extensions, and brake line relocation are also included.
Features & Benefits:
- Corrects suspension, steering, and driveline geometry for great on-road handling and improved off-road performance
- Heavy-duty differential skid slate improves offroad protection
- High-strength, 1/4" steel construction crossmembers correct lower control arm geometry
- High-strength, replacement steering knuckles improve strength while correcting steering angles to maintain ESC system compliance
- Multi-point differential relocation brackets secure front differential for improved CV operating angles
- Rear lift block and longer u-bolts for easy installation and level stance
Associated Comments:
- Factory wheels cannot be reinstalled. Fits Gas and Diesel models. Inner fender trimming may be required. The factory Electric Power Assisted Steering (EPAS) is sensitive to out-of-round, out-of-balance, overly aggressive tires. Depending on the situation, some oscillating feedback in the steering wheel maybe experienced. Will not fit ZR2 Models.
Additional Attributes:
- GTIN: 00810156360732
- Accommodates Factory Wheels: No
- Adjustable: No
- Back Spacing: 5.25"
- Back Spacing 2: 4.5"
- Back Spacing 3: 4.5"
- Finish: Powdercoat
- Front Lift Height: 5.5"
- Front Lift Method: Strut Spacers
- Installation Difficulty: 4 out of 5
- Installation Time: 6-8 hrs
- Lift Type: Lift Kit
- Material: Steel
- Max Tire Size: 305 / 55
- Max Tire Size 2: 295 / 65
- Max Tire Size 3: 295 / 65
- Rear Lift Height: 4"
- Rear Lift Method: Lift Block
- Required Tools: Torx Bit / Socket Set; Cut-off Tool; Wrenches: Standard
- Requires Metal Cutting: No
- Requires Welding: No
- Wheel Size: 20 x 9
- Wheel Size 2: 18 x 9
- Wheel Size 3: 17 x 8.5
Extended Information:
- Emissions : 1
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 48.0000 x 40.0000 x 24.0000 inches
