Give your 2018-2023 Ford Expedition a more aggressive look with this Zone 2" suspension lift.
Features & Benefits:
- Combination top spacer and preload spacer used to not overextend the OE upper ball joint, providing the maximum amount of lift safely to not cause premature wear of the OE upper ball joint
- 1.25" rear top spacer included to lift and level the rear with the 2" front lift
- All necessary sensor bracket included to reposition the CCD sensors to work with the lift in the front and rear
Associated Comments:
- Running boards will need to be removed to fit 295/55R20 on 20x9 with 5.75” BS; Coil Spring is under extreme pressure. Improper removal/installation of coil spring could result in serious injury or death; Use only a high-quality spring compressor and carefully read and follow the manufacturer’s instructions
Additional Attributes:
- GTIN:
- Accommodates Factory Wheels: Yes
- Adjustable: No
- Back Spacing: 5"
- Back Spacing 2: 5.75"
- Back Spacing 3: 5"
- Finish: Powdercoat
- Front Lift Height: 2"
- Front Lift Method: Top Spacer & Preload
- Installation Difficulty: Moderate (3 out of 5)
- Installation Time: 3-4
- Material: Polyurethane
- Max Tire Size: 285 / 60
- Max Tire Size 2: 295/55
- Max Tire Size 3: 285 / 55
- Rear Lift Height: 1.25"
- Rear Lift Method: Strut Spacers
- Required Tools: Strut Compressor; Basic Hand Tools; 204-592 Ball Joint Separator (Recommended); Tie Rod End Separator (Recommended); Cut Off Wheel or Equiv.
- Requires Metal Cutting: Yes
- Requires Welding: Yes
- Wheel Size: 20 x 9
- Wheel Size 2: 20 x 9
- Wheel Size 3: 20 x 9
Extended Information:
- Emissions : 1
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 14.5000 x 6.2500 x 6.1250 inches
