J-Konnect 3" Lift Kit - JSPEC146KFP

J-Konnect 3" Lift Kit - JSPEC146KFP

JKS

$2,317.55
(No reviews yet) Write a Review
SKU:
BKWD-JSPEC146KFP
Weight:
165.65 Ounces
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
For serious off-road use, step up to a JKS J-Konnect 3" suspension system for your Wrangler JL 2-Door. J-Konnect™ can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a rear track bar bracket (to correct axle positioning under vehicle). In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The track bar brace adds strength and protection. Combined with the matched dual-rate coil springs, custom-valved aluminum FOX 2.0 IFP Performance Series monotube gas shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect™ is ready for aggressive trail performance. Get connected with J-Konnect.

Features & Benefits:

  • Front/Rear HD Dual Rate Coil Springs designed for great ride quality across any terrain
  • HD springs offer additional load capacity for vehicles equipped with winch bumper, fullsize spare, roof rack, etc.
  • Front/Rear FOX 2.0 Performance Series shocks specifically valved for this suspension system for improved performance on and off-road
  • Front Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle
  • Front Sway Bar Quicker Disconnects and Rear Sway Bar Links for increased offroad articulation
  • Front/Rear Bump Stop Extensions to properly limit suspension up travel
  • Front/Rear J-Link Lower Control Arms to add strength and correct caster

Associated Comments:

  • Rubicon Models (all kits): Tire: 37x12.50; Wheel: 17x9, 18x9, 20x9; Backspacing: 5"; Non-Rubicon Models (all kits): Tire: 35x12.50; Wheel: 17x9, 18x9, 20x9; Backspacing: 5"; Other tire/wheel sizes can be used, however may require additional modifications.

Additional Attributes:

  • GTIN: 00814897015630
  • Coil Spring Included: Heavy Duty
  • Installation Difficulty: Moderately Easy
  • Installation Time: 7
  • J-rating: J-Konnect
  • Shocks Included: FOX 2.0 Performance Series

Extended Information:

  • Emissions : 1
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

!