Get the ultimate look and performance for your late-model Toyota Tundra with the BDS 7-inch suspension lift kit featuring FOX 2.5 Performance Elite (PE) coil-overs and shocks. These kits include the newaluminum-bodied FOX 2.5 Performance Elite (PE) coil-over shocks designed specifically to provide bolt-on performance for increased travel more adjustability via DSC adjustment and better heat dispersion allowing you to tackle the roughest terrain both on and off-road. Designed to improve stance performance and capability BDS includes everything necessary to set up your truck with clearance for up to 37-inchtires.
This kit takes advantage of BDS's proven high-clearance architecture for improved ground clearance strength and off-road protection while correcting suspension and steering geometry for excellent on-roadhandling characteristics. Up front the kit pairs the FOX 2.5 PE Coil-Overs with high-arched 1/4-inch thick steel crossmembers properly relocating the front differential to correct CV operating angles and protecting itwith heavy-duty laser-cut skid plates featuring the iconic tri-color stripe backing plate. Steering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles and high-strengthtie rod ends improving control and ESC system compatibility. These along with the provided sway bar drops bump stop extensions brake line brackets FOX reservoir mounts and hardware packs create acomprehensive front suspension lift ready for any challenge.In the rear the kit utilizes a pair of ProRide coil springs a track bar relocation bracket extended sway bar links and control arm brackets to lift and level the stance while maintaining suspension geometry and loadcapacity. For shocks you have the option of FOX 2.0 IFP Performance Series gas shocks or an upgrade to the FOX 2.5 Performance Elite (PE) series piggyback reservoir shocks to match the front and furtherenhance vehicle performance and adjustability.
This kit takes advantage of BDS's proven high-clearance architecture for improved ground clearance strength and off-road protection while correcting suspension and steering geometry for excellent on-roadhandling characteristics. Up front the kit pairs the FOX 2.5 PE Coil-Overs with high-arched 1/4-inch thick steel crossmembers properly relocating the front differential to correct CV operating angles and protecting itwith heavy-duty laser-cut skid plates featuring the iconic tri-color stripe backing plate. Steering geometry is corrected at the new taller ride height with CNC-machined ductile iron steering knuckles and high-strengthtie rod ends improving control and ESC system compatibility. These along with the provided sway bar drops bump stop extensions brake line brackets FOX reservoir mounts and hardware packs create acomprehensive front suspension lift ready for any challenge.In the rear the kit utilizes a pair of ProRide coil springs a track bar relocation bracket extended sway bar links and control arm brackets to lift and level the stance while maintaining suspension geometry and loadcapacity. For shocks you have the option of FOX 2.0 IFP Performance Series gas shocks or an upgrade to the FOX 2.5 Performance Elite (PE) series piggyback reservoir shocks to match the front and furtherenhance vehicle performance and adjustability.
Features & Benefits:
- FOX 2.5 PerformanceElite series coilovers andchoice of FOX 2.0 or 2.5(PE) rear shocks forimproved ride quality performance andcapability
- High clearancecrossmember designmaximizes groundclearanceRobust steering knuckles andtie rod ends to maintain ESCsystem compliance
- Fullwidth mult-piece skid platesystem improved offroadprotection
- Progressive rate rear coil springsimprove ride quality load capacity andsuspension travel
- Factory ProtectionPlus drivetrainwarranty included
Associated Comments:
- TRD Sports will achieve thesame amount of lift but willhave a lower stance than othermodels in the front
- Will not work withAdaptive VariableSuspension (AVS)System equipped vehicles
- Will not work with Air Ridemodels
- Will not work with TRD Promodels
- For regular off-road use itrecommended to upgrade NonTRD Off-Road trucks half axles(CVs) to Toyota TRD's (DriverPart# 434100C020 PassengerPart# 434100C020. Not includingTRD Pro models.
- The ADAS system in some vehiclesneeds to be recalibrated by a certifiedshop. The vehicle may warn the driverof potential collision from lower bridges overhead signs/wires and signs inwindy conditions. Most windshieldrepair shops (Safelite) and dealers arecapable of doing this.
- Wheel&Tire Combos were tested through normal driving conditions within alignment specs.Some models will required: removal of mud flaps fender liner being trimmed or resecured bodymount bump being cut off or ground down** Some 37" tires with 5-5.5" BS wheels may rub the sway bar during full lock turning situations
Additional Attributes:
- GTIN: 00840416433524
- Front Lift Height: 7
- Front Lift Method: Coil Over
- Installation Difficulty: veryDifficult
- Installation Time: 8-10 Hrs
- Rear Lift Height: 5
- Rear Lift Method: Coil Spring
- Rear Shock Option: FOX 2 0 Performance Series
- Shocks Included: Yes
Extended Information:
- Emissions : Emissions Compliance Exempt
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 48.0000 x 40.0000 x 36.0000 inches
