6.5 Inch Lift Kit - Long Arm - Jeep Wrangler JK (07-18) 4-Door - BDS1409FS

BDS Suspension

$3,704.55
(No reviews yet) Write a Review
SKU:
BDS-BDS1409FS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Maximize the capability of your 2007-2018 Jeep Wrangler 4 Door with this 6.5-inch lift kit with long arm conversion from BDS Suspension. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 37" tires. This 4-inch lift kit system improves on the factory 4-link with a redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel.

Up front the lift kit includes new pivot mounts that are constructed from 1/4" thick steel and work with the new heavy duty lower flex arms and adjustable upper flex arms to optimize handling characteristics 4" Pro-Ride coil springs capable of full coil bind and 3" bump stop extensions to control the compression travel but increase wheel travel. Also included are braided stainless steel brake lines sway bar links and front track bar relocation bracket and pitman arm to improve the steering and handling geometry.

In the rear the kit utilizes new pivot mounts designed to work with the new heavy duty lower flex arms and adjustable upper flex arms Pro-Ride coil springs sway bar drop brackets and a rear frame mounted track bar relocation bracket to correct axle shift. Round out this 4" lift kit with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.

Long Arm Conversion

Upgrading the standard control arms to a long arm adds strength improves handling and takes offroad articulation to the next level. This upgrade consists of massive 1/4" steel frame mounted brackets to install the oversized upper and lower formed long arms. The arms are formed for maximum tire clearance and allow the stock control arm tabs to remain on the vehicle. The upper arms are solid stock while the heavy wall tubular lower arms utilize oversized greaseable polyurethane bushings for superior road vibration isolation.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.

Features & Benefits:

  • Redesigned 4-link long arm to improve articulation and offer better control throughout wheel travel
  • ProRide coil springs offer improved ride quality and more articulation
  • Sway bar quicker disconnects and extended rear link for improved offroad flex
  • Rear track bar bracket repositions rear axle under vehicle
  • Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
  • Allows clearance for 37" tires

Associated Comments:

  • Will not fit 2wd models.
  • The front and rear driveshafts are maxed out at full droop. The front driveshaft boot can contact the transmission pan at extreme articulation on some models. Replacement of the front and rear driveshafts are recommended.
  • Exhaust modification may be required.

Additional Attributes:

  • GTIN:
  • Front Lift Height: 6_5
  • Front Lift Method: Coil Spring
  • Installation Difficulty: moderate
  • Installation Time: 12 Hrs
  • Installation Tools: Basic Hand Tools-Torque Wrench-drill-jack hydraulic-puller pitmanArm-welder
  • Rear Lift Height: 6
  • Rear Lift Method: Coil Springs
  • Shocks Included: Yes

Extended Information:

  • Emissions : Emissions Compliance Exempt
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: x x inches