BDS steps up the performance and capability of the 1987-1995 Jeep Wrangler YJ with a 5-inch suspension lift kit. Designed to improve stance this kit includes everything necessary to set your truck up right with clearance for up to 33" tires.
This 5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts front and rear track bar relocation brackets to center the axle stainless steel braided brake lines sway bar disconnects power steering pitman arm bump stop extensions and a transfer case drop kit to ease the drive line angles. Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.
Glide-Ride Leaf Springs
Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. These spring feature tapered leafs anti-friction pads bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.
This 5-inch lift kit includes front and rear Glide-Ride leaf springs with new u-bolts front and rear track bar relocation brackets to center the axle stainless steel braided brake lines sway bar disconnects power steering pitman arm bump stop extensions and a transfer case drop kit to ease the drive line angles. Round out this kit with specially tuned NX2 nitro series gas shocks to offer improved damper performance.
Glide-Ride Leaf Springs
Built to outperform BDS engineered the Glide-Ride leaf springs into a multi-leaf progressive spring rate design that provides a smooth ride with any load. This is accomplished with an exclusive triple-stage leaf spring design. These spring feature tapered leafs anti-friction pads bolt style leaf alignment clamps and a full military wrap to protect your spring eyes from the rocks. Upgrading to BDS Glide-Ride leaf springs will provide flexibility throughout the suspension cycle.
Features & Benefits:
- Glideride leaf springs to provide full lift height and increased capacity
- Front and rear track bar relocation brackets to center the axle
- Transfer case drop kit to ease the drive line angles
- Standard NX2 Nitro shocks with vehicle-specific valving for better control
- Easy 100% Bolt-on installation
Associated Comments:
- May require a larger diameter driveshaft if equipped with a 41-1/2" front driveshaft.
- A slip yoke eliminator and dual cardan style rear driveshaft is required.
- Extended shackles are recommended to clear the military wraps on the springs.
- Pitman arms will NOT fit YJ models equipped with manual steering.
Additional Attributes:
- GTIN: 00840416401677
- Front Lift Height: 5
- Front Lift Method: Leaf Spring
- Installation Difficulty: moderate
- Installation Time: 8 Hrs
- Installation Tools: Torque Wrench-fluid brake-jack hydraulic
- Rear Lift Height: 5
- Rear Lift Method: Leaf Spring
- Shocks Included: Yes
Extended Information:
- Emissions : Emissions Compliance Exempt
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: x x inches