4 Inch Lift Kit w/ Radius Arm - Ram 3500 (19-24) 4WD - Gas - BDS1700FS

BDS Suspension

$2,682.55
(No reviews yet) Write a Review
SKU:
BDS-BDS1700FS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Raise your RAM 3500 gas powered truck to the next heights with this 4-inch radius arm lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 37" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs heavy-duty replacement radius arms forged drop pitman arm and track bar bracket for steering correction sway bar relocation brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

At this height the transfer case needs to be indexed to allow use of the factory front driveshaft so an indexing ring and new transmission crossmember are supplied. In the rear this kit utilizes a high-strength fabricated lift block longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

HD Radius Arms

In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. These arms mount into the factory location and offer caster adjustment for a wide range of lift heights along with an OE-style rubber bushing at the frame mount for smooth quiet service-free operation.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits:

  • Heavy duty tubular radius arms improve strength handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • HD transmission crossmember and t-case indexing ring to correct front driveline angles and allow use of factory driveshafts
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Associated Comments:

  • Exhaust modification is required to clear the front driveshaft. The vehicle can be driven w/o a front driveshaft to an exhaust shop.
  • ADEF tank relocation bracket BDS122409is required for this kit to work with Dually or Mega Cab Models with Aisin Transmissions (8-bolt).
  • Vehicles equipped with a Manual T-case requires BDS122422 Manual transfer case shifter extension.
  • Vehicles equipped with a 2-piece rear drive shaft (carrier bearing) require BDS122406 Carrier bearing drop.

Additional Attributes:

  • GTIN: 00840416407372
  • Front Lift Height: 4
  • Front Lift Method: Coil Spring
  • Indexing Ring Option0: 8 Bolt
  • Installation Difficulty: moderate
  • Installation Time: 8-10 Hrs
  • Installation Tools: puller pitmanArm
  • Rear Lift Height: 3
  • Rear Lift Method: Blocks
  • Rear Lift Option: Without Factory Rear Overload Leaf
  • Shocks Included1: Yes

Extended Information:

  • Emissions : Emissions Compliance Exempt
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: x x inches