Built to outperform take your Ford 1980-1983 F100 and 1980-1996 F150 4WD truck to the next level with a 4-inch suspension lift kit with extended radius arms by BDS. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 33" tires.
Up front the lift kit includes Pro-Ride coil springs axle pivot relocation brackets extended radius arms radius arm drop mounts forged pitman arm for steering correction and precision tuned NX2 nitrogen charged shocks.
In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.
Pro-Ride Coil Springs
A pair of full-length vehicle-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.
Extended Radius Arms
In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. The extended radius arm system will reduce caster change through wheel travel creating a more capable and controlled feeling in the steering wheel both on and off road.
Up front the lift kit includes Pro-Ride coil springs axle pivot relocation brackets extended radius arms radius arm drop mounts forged pitman arm for steering correction and precision tuned NX2 nitrogen charged shocks.
In the rear the base kit utilizes a high-strength lift block longer u-bolts and a matching set of NX2 Nitro shocks.
Pro-Ride Coil Springs
A pair of full-length vehicle-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.
Extended Radius Arms
In place of the factory stamped steel radius arms BDS supplies a pair of high-strength tubular radius arms. The extended radius arm system will reduce caster change through wheel travel creating a more capable and controlled feeling in the steering wheel both on and off road.
Features & Benefits:
- Easy Bolt-on installation
- Pro-Ride dual rate coil springs ride smooth through any terrain
- Heavy duty steel drop brackets for proper suspension geometry
- Cast steel blocks provide level stance from front to rear
- NX2 Nitro shocks with vehicle-specific valving for better control
Associated Comments:
- Front end alignment required. Alignment cams may be required. See page 118.
- #123401 recommended if equipped with a front anti-sway bar. Ford produced 3 different styles of sway bar systems between 1980 and 1996. In extremely rare cases modification may be required.
- Extended lines required for all 4-6" lifts.
- Does not fit F150 models without power steering.
Additional Attributes:
- GTIN: 00840416416978
- Front Lift Height: 4
- Front Lift Method: Coil Spring
- Installation Difficulty: moderate
- Installation Time: 6 Hrs
- Installation Tools: Air Hammer Rec-Metric Standard Socket Wrench Set-drill-drill-jack hydraulic
- Rear Lift Height: 4
- Rear Lift Method: Leaf Spring
- Rear Lift Option: 4 Inch Leaf Springs
- Shocks Included0: Yes
Extended Information:
- Emissions : Emissions Compliance Exempt
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: x x inches
