4 Inch Lift Kit w/ 4-Link - Ram 3500 (13-18) 4WD - Gas - BDS1613FPE

BDS Suspension

$4,981.70
(No reviews yet) Write a Review
SKU:
BDS-BDS1613FPE
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Built to outperform BDS Suspension engineered a 4-inch lift kit with 4-Link conversion for your 2013-2018 RAM 3500 gas powered truck that will surely impress. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires.

Up front the lift kit includes gas-specific Pro-Ride coil springs 4-Link control arms with conversion mounts forged drop pitman arm and track bar bracket for steering correction bump stops brake line brackets and precision tuned NX2 or FOX 2.0 nitrogen charged shocks.

In the rear this kit utilizes a high-strength fabricated lift block longer u-bolts and a matching set of NX2 Nitro or FOX 2.0 Performance shocks.

4-Link Conversion

Convert the factory stamped steel radius arms over to the BDS 4-link to optimize suspension geometry for better handling characteristics while adding strength and stability. This bolt-on upgrade utilizes high-strength 1/4-inch steel brackets that allow mounting of HD upper and lower control arms to correct axle positioning while limiting caster change throughout wheel travel.

Pro-Ride Coil Springs

A pair of full-length gas-specific progressive rate Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains.

Steering Correction

To optimize steering geometry once lifted a forged drop pitman arm is used to minimize the steering angle and pair it with a heavy duty track bar drop bracket to keep them in phase through suspension travel while recentering the front axle.

Features & Benefits:

  • Heavy duty 4-link improve strength handling and caster control
  • Front high strength progressive rate coil springs for a great ride on any terrain
  • Front track bar relocation bracket to re-position axle
  • Forged drop pitman arm to correct steering angles
  • Front sway bar correction to maintain handling performance
  • BDS NX2 gas or FOX performance series IFP gas shocks to improved ride and offroad performance

Associated Comments:

  • The carrier-bearing drop kit is necessary for models equipped with two-piece rear drive shaft.
  • 6.4L gas models will require exhaust modification to clear the front driveshaft. 5.7L gas models may require exhaust modification as well. The vehicle can be driven without the front driveshaft to an exhaust shop for modifications to be made before reinstalling the driveshaft.

Additional Attributes:

  • GTIN: 00840416405248
  • Front Lift Height: 4
  • Front Lift Method: Coil Spring
  • Installation Difficulty: difficult
  • Installation Time: 7-9 Hrs
  • Installation Tools: bit unibit Step Drill Bit-drill-puller pitmanArm-welder
  • Rear Lift Height: 3
  • Rear Lift Method: Block
  • Rear Lift Option: 3 Inch Block Kit
  • Shocks Included0: Yes

Extended Information:

  • Emissions : 4
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF: