4 Inch Lift Kit - N3 Struts - Toyota Tundra 4WD (2016-2021) - 75131

Rough Country

Unmatched ground clearance due to
High clearance crossmember design
100% precision laser cut materials used in latest computer aided design process
Levels the front with the rear of the vehicle
Will work with factory 18-inch or larger wheels
Requires no modification to the stock differential mounts, drivetrain or exhaust
Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Cutting And Drilling Is Required. Does Not Fit Pro Series Models Does Not Fit Xsp-X Models. Requires 18-Inch Or Larger Wheels. Stock 18-Inch Or Larger Wheels Can Be Used But Can Accommodate Tires No Wider Than 11.5-Inch. In Some Cases Minor Trimming May Be Needed To Clear 35-Inch Tires. On Vehicles Equipped With A Two Piece Driveshaft There Is The Potential For Take Off Vibration, This Can Be Corrected With Sku: 1776Box1 Carrier Bearing Shim Kit. Please View Instructions For Complete Information On Proper Tire / Wheel Combinations.

GTIN: 00843030199272
Front Components: Lifted knuckles, N3 loaded struts, Front crossmember, Rear crossmember, Steering stops, Brake line brackets, Differential drop brackets, Bumpstop brackets, Sway-bar brackets, Lower skid plate, Hardware
Install Time: 8-10 hours
Rear Components: Fabricated lift blocks, U-bolts, Brake line brackets, Hardware
Tire Wheel and Offset Info: 35x12.50R18:18x8.5:5x150:+0:Minor Trimming; 35x12.50R18:18x8.5:5x150:+1:Minor Trimming; 35x12.50R18:18x8.5:5x150:+36:-; 35x12.50R18:18x9:5x150:-12:Minor Trimming; 35x12.50R18:18x9:5x150:+0:Minor Trimming; 35x12.50R18:18x9:5x150:+1:Minor Trimming; 35x12.50R18:18x9:5x150:+18:-; 35x12.50R18:18x9:5x150:+20:-; 35x12.50R20:20x9:5x150:-12:Minor Trimming; 35x12.50R20:20x9:5x150:+0:Minor Trimming; 35x12.50R20:20x9:5x150:+1:Minor Trimming; 35x12.50R20:20x9:5x150:+18:-; 295 60R20:20x9:5x150:+18:-; 35x12.50R20:20x9:5x150:+20:-; 295 60R20:20x10:5x150:-19:Trimming Required

$1,429.95

(No reviews yet) Write a Review

Current Stock:

Quantity:

Adding to cart… The item has been added

Unmatched ground clearance due to
High clearance crossmember design
100% precision laser cut materials used in latest computer aided design process
Levels the front with the rear of the vehicle
Will work with factory 18-inch or larger wheels
Requires no modification to the stock differential mounts, drivetrain or exhaust
Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Cutting And Drilling Is Required. Does Not Fit Pro Series Models Does Not Fit Xsp-X Models. Requires 18-Inch Or Larger Wheels. Stock 18-Inch Or Larger Wheels Can Be Used But Can Accommodate Tires No Wider Than 11.5-Inch. In Some Cases Minor Trimming May Be Needed To Clear 35-Inch Tires. On Vehicles Equipped With A Two Piece Driveshaft There Is The Potential For Take Off Vibration, This Can Be Corrected With Sku: 1776Box1 Carrier Bearing Shim Kit. Please View Instructions For Complete Information On Proper Tire / Wheel Combinations.

GTIN: 00843030199272
Front Components: Lifted knuckles, N3 loaded struts, Front crossmember, Rear crossmember, Steering stops, Brake line brackets, Differential drop brackets, Bumpstop brackets, Sway-bar brackets, Lower skid plate, Hardware
Install Time: 8-10 hours
Rear Components: Fabricated lift blocks, U-bolts, Brake line brackets, Hardware
Tire Wheel and Offset Info: 35x12.50R18:18x8.5:5x150:+0:Minor Trimming; 35x12.50R18:18x8.5:5x150:+1:Minor Trimming; 35x12.50R18:18x8.5:5x150:+36:-; 35x12.50R18:18x9:5x150:-12:Minor Trimming; 35x12.50R18:18x9:5x150:+0:Minor Trimming; 35x12.50R18:18x9:5x150:+1:Minor Trimming; 35x12.50R18:18x9:5x150:+18:-; 35x12.50R18:18x9:5x150:+20:-; 35x12.50R20:20x9:5x150:-12:Minor Trimming; 35x12.50R20:20x9:5x150:+0:Minor Trimming; 35x12.50R20:20x9:5x150:+1:Minor Trimming; 35x12.50R20:20x9:5x150:+18:-; 295 60R20:20x9:5x150:+18:-; 35x12.50R20:20x9:5x150:+20:-; 295 60R20:20x10:5x150:-19:Trimming Required