4.5 Inch Lift Kit - V2 - Ford F-250 F-350 Super Duty 4WD (05-07) - 47970

Rough Country

$1,169.95
(No reviews yet) Write a Review
SKU:
RC-47970
Weight:
160.50 Ounces
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Give your 05-07 Ford Super Duty an impressive upgrade, front to back with Rough Country's 4.5" Ford Suspension Lift Kit! This easy-to-install lift kit raises the front of your vehicle to be equal height with the rear for a leveled, better-than-stock look that gives an improved ride height and more aggressive appearance.This kit features a set of front, lifted coil spacers allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm fropbrackets and track bar drop bracket are provided to keep everything at optimum angles for a factory-like ride, even after lifting.A set of Rough Country's premium N3 shocks are also included. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride quality. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.Get the wheels you want! Rough Country's 4.5" Suspension Lift Kit comes with everything you need to fit up to a 35" tire with proper wheel backspacing.Best of all, Rough Country's 4.5" Suspension Lift Kit is backed by our Lifetime Replacement Warranty.

Features & Benefits:

  • Easy bolt-on installation
  • Increased ground clearance
  • Levels the front with the rear of the vehicle
  • Radius arm drop brackets allow for properly set caster
  • Proper caster is crucial to maintaining factory handling and drivability
  • Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
  • Fabricated blocks are stronger and offer a longer lifespan than cast blocks
  • Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.

Associated Comments:

  • Does NOT fit V-8 gas engine models. Does NOT fit dually models. V-10 gas engine models will require exhaust modification to clear the front driveshaft. A carrier bearing drop bracket is needed for trucks equipped with a 2-piece rear driveshaft. (#1197)

Additional Attributes:

  • GTIN: 00840269918858
  • Front Components: Lifted coil springs, Radius arm drop brackets, Sway-bar link extensions, Track bar drop bracket, Brake line brackets, Bumpstop spacers, Hardware
  • Install Time: 6 - 8 hours
  • Rear Components: 6 in fabricated anti-wrap lift blocks, U-bolts, Hardware
  • Tire Wheel and Offset Info: 35x12.50R17:17x8.5:8x170:+0:-; 35x12.50R17:17x8.5:8x170:+1:-; 35x12.50R17:17x9:8x170:-12:-; 35x12.50R17:17x9:8x170:+0:-; 35x12.50R17:17x9:8x170:+1:-; 35x12.50R18:18x8.5:8x170:+0:-; 35x12.50R18:18x8.5:8x170:+1:-; 35x12.50R18:18x9:8x170:-12:-; 35x12.50R18:18x9:8x170:+0:-; 35x12.50R18:18x9:8x170:+1:-; 35x12.50R18:18x10:8x170:-25:-; 35x12.50R18:18x10:8x170:-24:-; 35x12.50R18:18x10:8x170:-19:-; 35x12.50R18:18x10:8x170:-18:-; 35x12.50R20:20x9:8x170:-12:-; 35x12.50R20:20x9:8x170:+0:-; 35x12.50R20:20x9:8x170:+1:-; 35x12.50R20:20x10:8x170:-25:-; 35x12.50R20:20x10:8x170:-24:-; 35x12.50R20:20x10:8x170:-19:-; 295 60R20:20x10:8x170:-19:-; 35x12.50R20:20x10:8x170:-18:-; 295 60R20:20x10:8x170:-18:-; 35x12.50R20:20x12:8x170:-44:Trimming Required; 35x12.50R22:22x10:8x170:-25:-; 35x12.50R22:22x10:8x170:-24:-; 35x12.50R22:22x10:8x170:-19:-; 35x12.50R22:22x10:8x170:-18:-; 35x12.50R22:22x12:8x170:-44:Trimming Required

Extended Information:

  • Emissions : Emissions Compliance Exempt
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: x x inches

PDF: