Improve the style and handling of your 1993-1998 Jeep Grand Cherokee ZJ with this 3-inch lift kit from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 31" tires.
Up front the lift kit includes Glide-Ride coil springs extended sway bar links and front track bar bracket to properly center the axle. In the rear the kit utilizes matching Glide-Ride coil springs to add height without creating a harsh ride to level out the Jeep and rear track bar bracket. These kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length Jeep-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Up front the lift kit includes Glide-Ride coil springs extended sway bar links and front track bar bracket to properly center the axle. In the rear the kit utilizes matching Glide-Ride coil springs to add height without creating a harsh ride to level out the Jeep and rear track bar bracket. These kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance.
Pro-Ride Coil Springs
A pair of full-length Jeep-specific Pro-Ride coil springs are supplied to provide the correct lift height and smooth predictable ride across various terrains. Manufactured from high tensile steel our direct OE replacement coil springs are engineered with properly sized wire diameter. This results in maximum reliability without premature coil bind.
Features & Benefits:
- ProRide coil springs offer improved ride quality and more articulation
- Extended sway bar link for improved offroad flex
- Front and Rear track bar bracket repositions rear axle under vehicle
- Choice of NX2 gas or FOX 2.0 IFP performance series shocks for improved damping
- Allows clearance for 31" tires
Associated Comments:
- Vehicles equipped with V8 may not achieve stated height.
- Measure your front driveshaft - over 24-1/2" no modifications required 20" to 24" you may need to change over to a spicer type joint if vibration occurs. It your driveshaft is less than 20" then a Spicer type joint is required and vibration may persist.
Additional Attributes:
- GTIN: 00840416416770
- Front Lift Height: 3
- Front Lift Method: Coil Spring
- Installation Difficulty: moderate
- Installation Time: 6 Hrs
- Installation Tools: Torque Wrench-bit torx set-jack hydraulic
- Rear Lift Height: 3
- Rear Lift Method: Coil Springs
- Shocks Included: Yes
Extended Information:
- Emissions : Announced
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: x x inches
