Elevate your 2010-2023 Toyota 4Runner’s performance and stance with the BDS XT 3-Inch Lift Kit. This high-quality lift kit is specifically designed for adventure enthusiasts seeking enhanced off-road capability and a commanding presence on the road. This 4Runner lift kit allows for the fitment of 285/70R17 tires on a 17x8 wheel with 5 inches of backspacing. This setup not only enhances your 4Runner's aggressive look but also improves traction and ground clearance for off-road adventures.
Up front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a 1.5-Inch lift rear spring designed for improved load capacity and ride comfort. Finish off the rear with either a FOX 2.0 Performance Series shock delivering excellent performance and control or a complementary set of FOX 2.5 Performance Elite shocks designed to enhance control and stability featuring easy adjustability to tackle any terrain with confidence.
XT Series Lift Kit
Experience the edge with BDS's XT Series—where XTra Travel Tuning and Performance meet cool design pushing your ride beyond limits and lifting not just your truck but also your off-road prowess!
FOX Performance Elite
FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs offering 10 separate low-speed and 12 high-speed compression levels with a black anodized aluminum reservoir to increase cooling efficiency.
HD Upper Control Arms (UCAs)
Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.
Up front the lift kit includes FOX 2.5 Performance Elite Series remote reservoir coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a 1.5-Inch lift rear spring designed for improved load capacity and ride comfort. Finish off the rear with either a FOX 2.0 Performance Series shock delivering excellent performance and control or a complementary set of FOX 2.5 Performance Elite shocks designed to enhance control and stability featuring easy adjustability to tackle any terrain with confidence.
XT Series Lift Kit
Experience the edge with BDS's XT Series—where XTra Travel Tuning and Performance meet cool design pushing your ride beyond limits and lifting not just your truck but also your off-road prowess!
FOX Performance Elite
FOX 2.5 Performance Elite shocks offer next level performance for on-road comfort and off-road comfort capability. Tuned and ready to install right out of the box these bolt-on 2.5-inch diameter shocks are built for abuse and packed with race-proven technology. They include a remote reservoir for additional fluid capacity to keep your shocks running cool so you can push the limits in the rough terrain. The DSC adjuster adds remarkable versatility and precise tuning with a simple twist of either two adjuster knobs offering 10 separate low-speed and 12 high-speed compression levels with a black anodized aluminum reservoir to increase cooling efficiency.
HD Upper Control Arms (UCAs)
Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.
Features & Benefits:
- Highly engineeredupper control armsfeaturing 1.5" tubularsteel construction withindexed ball joint toprovide maximumtravel with factory stylerubber bushings whichprovide long lastingmaintenance freeoperation.
- FOX 2.5 PerformanceElite series DSC coilovers offer improveddamper performanceover stock.
- FOX 2.5 Performance Eliteseries DSC rear shocks or FOX 2.0 Performance Series IFP rear shocksincluded.
- FactoryProtection Plusdrivetrainwarranty included
- Easy 100% Bolton installation
Associated Comments:
- Will not work on TRD Promodels equipped with theX-REAS shock system.
- Will not work withfactory KDSS swaybar system.
- Other equivalenttire/wheel size optionsshould work - mayrequire minor trimmingfor some combinations.
Additional Attributes:
- GTIN:
- Front Lift Height: 3
- Front Lift Method: Coil Over
- Installation Difficulty: moderatelyEasy
- Installation Time: 4-6 Hrs
- Rear Lift Height: 1_5
- Rear Lift Method: Coil Springs
- Rear Shock Option: FOX 2 0 Performance Series
- Shocks Included: Yes
Extended Information:
- Emissions : 4
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: x x inches
