3.5 Inch Lift Kit - V2 - Jeep Wrangler Unlimited 2WD 4WD (07-18) - 69470

Rough Country

Easy bolt-on installation
Increased ground clearance Control arm drop brackets promote optimum geometry for smooth handling & ride quality Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently
Factory tuned coil springs are based on the stock spring rate Control arms include Clevite brand OEM style rubber bushings

Does NOT fit 2-door models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

GTIN: 00843030161439
Front Components: Lifted coil springs, Control arm drop brackets, Track bar drop bracket, Pitman arm, Brake line relocation brackets, Hardware
Install Time: 4-5 hours
Rear Components: Lifted coil springs, Coil correction plates, Track bar drop bracket, Extended sway-bar links, Brake line relocation brackets, Hardware
Tire Wheel and Offset Info: 35x12.50R17:17x8.5:5x5.0:+0:-; 35x12.50R17:17x8.5:5x5.0:+1:-; 35x12.50R17:17x9:5x5.0:-12:-; 35x12.50R17:17x9:5x5.0:+0:-; 35x12.50R17:17x9:5x5.0:+1:-; 35x12.50R18:18x8.5:5x5.0:+0:-; 35x12.50R18:18x9:5x5.0:-12:-; 35x12.50R18:18x9:5x5.0:+0:-; 35x12.50R18:18x10:5x5.0:-25:-; 35x12.50R18:18x10:5x5.0:-24:-; 35x12.50R18:18x10:5x5.0:-19:-; 35x12.50R18:18x10:5x5.0:-18:-; 35x12.50R20:20x9:5x5.0:-12:-; 295 60R20:20x9:5x5.0:-12:-; 35x12.50R20:20x9:5x5.0:+0:-; 35x12.50R20:20x9:5x5.0:+1:-; 295 60R20:20x9:5x5.0:+1:-; 35x12.50R20:20x10:5x5.0:-44:Minor Trimming; 35x12.50R20:20x10:5x5.0:-25:-; 35x12.50R20:20x10:5x5.0:-24:-; 35x12.50R20:20x10:5x5.0:-19:-; 295 60R20:20x10:5x5.0:-19:-; 35x12.50R20:20x10:5x5.0:-18:-; 295 60R20:20x10:5x5.0:-18:-; 35x12.50R22:22x10:5x5.0:-44:Minor Trimming

$919.95

(No reviews yet) Write a Review

Current Stock:

Quantity:

Adding to cart… The item has been added

Easy bolt-on installation
Increased ground clearance Control arm drop brackets promote optimum geometry for smooth handling & ride quality Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently
Factory tuned coil springs are based on the stock spring rate Control arms include Clevite brand OEM style rubber bushings

Does NOT fit 2-door models. 2012-2018 models require exhaust modifications to clear the front driveshaft (#1030) On Automatic equipped vehicles; due to use of an oversize driveshaft from the factory and inadequate factory clearance it may be possible for the front driveshaft to come in contact with the automatic transmission pan tearing the factory boot and rubbing on the shaft. Generally this occurs during heavy articulation when front sway bar links are disconnected and longer shocks are installed. If this is found to occur, the proper procedure would be to replace the oversize factory shaft with an aftermarket smaller diameter shaft to increase clearance between the transmission and front driveshaft. Rough Country does offer this driveshaft if needed.

GTIN: 00843030161439
Front Components: Lifted coil springs, Control arm drop brackets, Track bar drop bracket, Pitman arm, Brake line relocation brackets, Hardware
Install Time: 4-5 hours
Rear Components: Lifted coil springs, Coil correction plates, Track bar drop bracket, Extended sway-bar links, Brake line relocation brackets, Hardware
Tire Wheel and Offset Info: 35x12.50R17:17x8.5:5x5.0:+0:-; 35x12.50R17:17x8.5:5x5.0:+1:-; 35x12.50R17:17x9:5x5.0:-12:-; 35x12.50R17:17x9:5x5.0:+0:-; 35x12.50R17:17x9:5x5.0:+1:-; 35x12.50R18:18x8.5:5x5.0:+0:-; 35x12.50R18:18x9:5x5.0:-12:-; 35x12.50R18:18x9:5x5.0:+0:-; 35x12.50R18:18x10:5x5.0:-25:-; 35x12.50R18:18x10:5x5.0:-24:-; 35x12.50R18:18x10:5x5.0:-19:-; 35x12.50R18:18x10:5x5.0:-18:-; 35x12.50R20:20x9:5x5.0:-12:-; 295 60R20:20x9:5x5.0:-12:-; 35x12.50R20:20x9:5x5.0:+0:-; 35x12.50R20:20x9:5x5.0:+1:-; 295 60R20:20x9:5x5.0:+1:-; 35x12.50R20:20x10:5x5.0:-44:Minor Trimming; 35x12.50R20:20x10:5x5.0:-25:-; 35x12.50R20:20x10:5x5.0:-24:-; 35x12.50R20:20x10:5x5.0:-19:-; 295 60R20:20x10:5x5.0:-19:-; 35x12.50R20:20x10:5x5.0:-18:-; 295 60R20:20x10:5x5.0:-18:-; 35x12.50R22:22x10:5x5.0:-44:Minor Trimming