Step up to our highest lift that will let you clear 38" tires, but will still leave you in control. This coil spring and cast block 8" lift Kit is the easy and affordable way to create the truck you’ve always wanted. Fits Diesel 4WD 2003 - 2007 Dodge / Ram 2500 / 3500 Trucks.
Features & Benefits:
- 100% bolt-on design for easy installation
- High-strength control arm relocation brackets correct suspension geometry and add rigidity
Associated Comments:
- If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit. Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Diesels Only! Lift springs are designed for heavier diesel models only. Using lift springs with lighter gas models may cause excessive lift and is NOT recommended. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Factory wheels fit when paired with factory / original equipment tire size. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Additional Attributes:
- GTIN: 00810156363061
- Accommodates Factory Wheels: See Notes
- Adjustable: No
- Back Spacing: 5"
- Back Spacing 2: 5"
- Back Spacing 3: 5"
- Finish: Powdercoat
- Front Lift Height: 8"
- Front Lift Method: Coil Springs
- Installation Difficulty: 3 out of 5
- Installation Time: 7 hrs
- Lift Type: Lift Kit
- Max Tire Size: 38 x 13.5
- Max Tire Size 2: 38 x 13.5
- Max Tire Size 3: 38 x 13.5
- Rear Lift Height: 5"
- Rear Lift Method: Cast Blocks
- Requires Metal Cutting: No
- Requires Welding: No
- Wheel Size: 17 x 9
- Wheel Size 2: 18 x 9
- Wheel Size 3: 20 x 9
Extended Information:
- Emissions : 1
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 48.0000 x 40.0000 x 24.0000 inches