Zone 6" Coil Spring Lift Kit - ZOND37

Zone 6" Coil Spring Lift Kit - ZOND37

Zone Offroad

$988.80
(No reviews yet) Write a Review
SKU:
FQMS-ZOND37
Weight:
160.40 Ounces
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Ready for the big time? Then this is your 6" Lift Kit. You’ll really stand out from the crown when you clear massive 37" tires. Get the look and the performance you want. Fits Diesel 4WD 2009 - 2013 Dodge Ram 2500/3500 trucks. You won’t regret it.

Features & Benefits:

  • 100% bolt-on design for easy installation
  • High-strength control arm relocation brackets correct suspension geometry and add rigidity

Associated Comments:

  • Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location. Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.

Additional Attributes:

  • GTIN: 00810156363320
  • Accommodates Factory Wheels: See Notes
  • Adjustable: No
  • Back Spacing: 5"
  • Back Spacing 2: 5"
  • Back Spacing 3: 5"
  • Finish: Powdercoat
  • Front Lift Height: 6"
  • Front Lift Method: Coil Springs
  • Installation Difficulty: 3 out of 5
  • Installation Time: 7 hrs
  • Lift Type: Lift Kit
  • Max Tire Size: 37 x 12.5
  • Max Tire Size 2: 37 x 12.5
  • Max Tire Size 3: 37 x 12.5
  • Rear Lift Height: 4"
  • Rear Lift Method: Cast Blocks
  • Requires Metal Cutting: No
  • Requires Welding: No
  • Wheel Size: 17 x 9
  • Wheel Size 2: 18 x 9
  • Wheel Size 3: 20 x 9

Extended Information:

  • Emissions : 1
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

!