Zone 6" Coil Spring Lift Kit - ZOND32

Zone Offroad

When you go big you can go anywhere. This 6" Lift Kit puts your truck into a class of its own, letting you clear huge 37" tires. Get the look and performance you want out of your Diesel 4WD 2008 Dodge / Ram 1500 Mega Cab / 2500 / 3500 Truck.

Features & Benefits:

100% bolt-on design for easy installation
High-strength control arm relocation brackets correct suspension geometry and add rigidity

Associated Comments:

If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit. Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.

Additional Attributes:

GTIN: 00810156363221
Accommodates Factory Wheels: See Notes
Adjustable: No
Back Spacing: 5"
Back Spacing 2: 5"
Back Spacing 3: 5"
Finish: Powdercoat
Front Lift Height: 6"
Front Lift Method: Coil Springs
Installation Difficulty: 3 out of 5
Installation Time: 7 hrs
Lift Type: Lift Kit
Max Tire Size: 37 x 12.5
Max Tire Size 2: 37 x 12.5
Max Tire Size 3: 37 x 12.5
Rear Lift Height: 4"
Rear Lift Method: Cast Blocks
Requires Metal Cutting: No
Requires Welding: No
Wheel Size: 17 x 9
Wheel Size 2: 18 x 9
Wheel Size 3: 20 x 9

Extended Information:

Emissions : 1
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

D1801-ins

$988.80

(No reviews yet) Write a Review

SKU:: FQMS-ZOND32
UPC:
Weight:: 162.60 Ounces
Shipping:: Calculated at Checkout

Current Stock:

Quantity:

Adding to cart… The item has been added

Description

Features & Benefits:

100% bolt-on design for easy installation
High-strength control arm relocation brackets correct suspension geometry and add rigidity

Associated Comments:

If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit. Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.