Zone 6" Coil Spring Lift Kit - ZOND27

Zone Offroad

It’s time to hang with the big boys. You can’t help but stand out with this 6" Lift Kit that clears 37" tires. Get the look and performance you want out of your 4WD Diesel 2003 - 2007 Dodge / Ram 2500 / 3500 Truck. Yet another kit from enthusiasts, for enthusiasts.

Features & Benefits:

100% bolt-on design for easy installation
High-strength control arm relocation brackets correct suspension geometry and add rigidity

Associated Comments:

If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit. Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Factory wheels fit when paired with factory / original equipment tire size. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.

Additional Attributes:

GTIN: 00810156363108
Accommodates Factory Wheels: See Notes
Adjustable: No
Back Spacing: 5"
Back Spacing 2: 5"
Back Spacing 3: 5"
Finish: Powdercoat
Front Lift Height: 6"
Front Lift Method: Coil Springs
Installation Difficulty: 3 out of 5
Installation Time: 7 hrs
Lift Type: Lift Kit
Max Tire Size: 37 x 12.5
Max Tire Size 2: 37 x 12.5
Max Tire Size 3: 37 x 12.5
Rear Lift Height: 4"
Rear Lift Method: Cast Blocks
Requires Metal Cutting: No
Requires Welding: No
Wheel Size: 17 x 9
Wheel Size 2: 18 x 9
Wheel Size 3: 20 x 9

Extended Information:

Emissions : 1
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

D1801-ins

$988.80

(No reviews yet) Write a Review

SKU:: FQMS-ZOND27
UPC:
Weight:: 162.85 Ounces
Shipping:: Calculated at Checkout

Current Stock:

Quantity:

Adding to cart… The item has been added

Description

Features & Benefits:

100% bolt-on design for easy installation
High-strength control arm relocation brackets correct suspension geometry and add rigidity

Associated Comments:

If your Truck has had the steering gear box changed and the sector shaft diameter measures ~1-1/2”-1-5/8” you will need ZOND8404 also with your kit. Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration. Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring. Factory wheels fit when paired with factory / original equipment tire size. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.