Zone 5" Suspension Lift Kit - ZONT5

Zone 5" Suspension Lift Kit - ZONT5

Zone Offroad

$1,256.80
(No reviews yet) Write a Review
SKU:
FQMS-ZONT5
Weight:
206.05 Ounces
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Take your Tundra to new heights with this 5" lift kit from Zone Offroad. Kits include everything needed from high strength crossmembers and steering knuckles to lower strut extensions and rear block kit to level out the stance. Get the look, performance, and capability your truck deserves with clearance for up to 35" tires.

Features & Benefits:

  • High strength crossmembers to correct lower control arm positioning
  • Ductile iron steering knuckles to correct steering geometry and maintain ESC system compatibility
  • Lower strut extensions to provide lift and install easily
  • Weld-in chassis plates add strength and rigidity
  • Rear lift blocks and u-bolts to lift and level the stance
  • Sway bar, brake line, and bump stop relocation brackets to correct operating angles

Associated Comments:

  • RWD models may require rear driveline modification. Stock 18" wheels can not be installed. factory 20" wheels with more than 6.25" backspacing can not be installed. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration. Will NOT work on TRD Pro Models equipped with Bilstein Piggyback Struts. Will work with Bilstein (yellow) factory front struts on 2014-2016 models.

Additional Attributes:

  • GTIN: 00810156367915
  • Accommodates Factory Wheels: No
  • Adjustable: No
  • Back Spacing: 5.5"
  • Back Spacing 2: 6.25"
  • Back Spacing 3: 6.25"
  • Finish: Powdercoat
  • Fmvss Certification: N/A (See notes)
  • Front Lift Height: 5"
  • Front Lift Method: Knuckle & Drop Cross-Member
  • Installation Difficulty: 3 out of 5
  • Installation Time: 8 hrs
  • Lift Type: Lift Kit
  • Max Tire Size: 35 x 12.5
  • Max Tire Size 2: 35 x 12.5
  • Max Tire Size 3: 35 x 12.5
  • Rear Lift Height: 3"
  • Rear Lift Method: Fabricated Blocks
  • Requires Metal Cutting: No
  • Requires Welding: No
  • Wheel Size: 18 x 9
  • Wheel Size 2: 20 x 9
  • Wheel Size 3: 22 x 9

Extended Information:

  • Emissions : 1
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

!