D1511_D1512-ins
Go big and go anywhere with this 5" Lift Kit for your truck that gives you clearance for huge tires up to 35". This kit has everything you need to raise your 4WD 2000 - 2002 Dodge / Ram 1500 Truck. If you’re going to do it, do it right.
Features & Benefits:
- 100% bolt-on design for easy installation
- Bump stop extensions properly limit up-travel, protecting your vehicle
- Heavy-duty upper and lower control arms improve strength and articulation while correcting caster
- Heavy-duty front track bar bracket correctly positions front axle under vehicle
- Steering components included to ensure smooth post-installation operation of steering system and factory-consistent vehicle handling characteristics
Associated Comments:
- Brakes: If truck is equipped with a proportioning valve a relocation bracket kit is required. Add in configuration / checkout. Check Factory Sway Bar Setup: Dodge Rams were manufactured with two different front sway bar link setups. Some were mounted ABOVE the axle bracket and some BELOW. If your model’s sway bar links are above the axle bracket, a sway bar link kit is required. Add in configuration / checkout. Check Your Rear Springs: If your vehicle is equipped with a top mounted overload/helper spring, 4 longer U-bolts may be required. Factory block is replaced with 5" block and add-a-leaf combo to obtain a level stance. Factory Sway Bar? If your vehicle is equipped with a factory rear sway bar, a rear sway bar link kit is recommended. Add in configuration / checkout. Factory wheels fit when paired with factory / original equipment tire size. Fitment: Will NOT fit models built before February 9, 1994 due to track bar stud size. Steering Stabilizer Required: Due to the factory drag link flip when installing this kit the factory steering stabilizer cannot be reinstalled. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Additional Attributes:
- GTIN: 00810156363559
- Accommodates Factory Wheels: See Notes
- Adjustable: No
- Back Spacing: 4"
- Back Spacing 2: 4"
- Back Spacing 3: 4"
- Finish: Powdercoat
- Front Lift Height: 5"
- Front Lift Method: Coil Springs
- Installation Difficulty: 2 out of 5
- Installation Time: 5.5 hrs
- Lift Type: Lift Kit
- Max Tire Size: 35 x 12.5
- Max Tire Size 2: 35 x 12.5
- Max Tire Size 3: 35 x 12.5
- Rear Lift Height: 5"
- Rear Lift Method: Add-A-Leaf & Cast Block
- Requires Metal Cutting: No
- Requires Welding: No
- Wheel Size: 16 x 8
- Wheel Size 2: 17 x 9
- Wheel Size 3: 18 x 9
Extended Information:
- Emissions : 1
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 48.0000 x 40.0000 x 24.0000 inches
