Zone 4" Radius Arm Lift Kit - ZONF24

Zone 4" Radius Arm Lift Kit - ZONF24

Zone Offroad

$937.70
(No reviews yet) Write a Review
SKU:
FQMS-ZONF24
Weight:
249.40 Ounces
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
With ample additional ground clearance and room for up to 33" tires, you’ll be well-equipped for a trip down ‘the road less traveled’ with this 4" Radius Arm Lift Kit, with rear block lift kit for your 4WD 2008 - 2010 Ford F-250 / F-350.

Features & Benefits:

  • Full length replacement coil springs add additional ride height while maintaining ride quality
  • Heavy-duty track bar re-centers front axle, adds strength and limits lateral movement
  • High-strength, 1/4" steel construction corrects caster, improves tire clearance, and maximizes ground clearance
  • High-strength, black e-coated U-bolts
  • Rear lift block and longer U-bolts for easy installation and level stance

Associated Comments:

  • Check Your Rear Springs: If your vehicle is equipped with both a stock 4" rear block and a top mounted overload/helper spring, select the longer 18.5" Rear U-Bolts. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block. Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Additional Attributes:

  • GTIN: 00810156365362
  • Accommodates Factory Wheels: See Notes
  • Adjustable: No
  • Back Spacing: 4.5"
  • Back Spacing 2: 4.5"
  • Back Spacing 3: 4.5"
  • Finish: Powdercoat
  • Front Lift Height: 4"
  • Front Lift Method: Radius Arm Drop
  • Installation Difficulty: 2 out of 5
  • Installation Time: 6 hrs
  • Lift Type: Lift Kit
  • Max Tire Size: 35 x 12.5
  • Max Tire Size 2: 35 x 12.5
  • Max Tire Size 3: 35 x 12.5
  • Rear Lift Height: 5"
  • Rear Lift Method: Cast Blocks
  • Requires Metal Cutting: No
  • Requires Welding: No
  • Wheel Size: 17 x 9
  • Wheel Size 2: 18 x 9
  • Wheel Size 3: 20 x 9

Extended Information:

  • Emissions : 1
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

!