Zone 4" Radius Arm Lift Kit - ZONF23

Zone Offroad

Elevate your truck’s status with this 4" Radius Arm Lift Kit that will let you clear those 35" tires. This kit has everything you need to give you the ride you want and the look that’s going to turn heads. Fits Diesel 4WD 2008 - 2010 Ford F-250 / F-350.

Features & Benefits:

Full length replacement coil springs add additional ride height while maintaining ride quality
Heavy-duty track bar re-centers front axle, adds strength and limits lateral movement
High-strength, 1/4" steel construction corrects caster, improves tire clearance, and maximizes ground clearance
High-strength, black e-coated U-bolts
Rear lift block and longer U-bolts for easy installation and level stance

Associated Comments:

Check Your Rear Springs: If your vehicle is equipped with both a stock 4" rear block and a top mounted overload/helper spring, select the longer 18.5" Rear U-Bolts. Factory wheels fit when paired with factory / original equipment tire size. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block. Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.

Additional Attributes:

GTIN: 00810156365348
Accommodates Factory Wheels: See Notes
Adjustable: No
Back Spacing: 4.5"
Back Spacing 2: 4.5"
Back Spacing 3: 4.5"
Finish: Powdercoat
Front Lift Height: 4"
Front Lift Method: Radius Arm Drop
Installation Difficulty: 2 out of 5
Installation Time: 6 hrs
Lift Type: Lift Kit
Max Tire Size: 35 x 12.5
Max Tire Size 2: 35 x 12.5
Max Tire Size 3: 35 x 12.5
Rear Lift Height: 5"
Rear Lift Method: Cast Blocks
Requires Metal Cutting: No
Requires Welding: No
Wheel Size: 17 x 9
Wheel Size 2: 18 x 9
Wheel Size 3: 20 x 9

Extended Information:

Emissions : 1
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

F1422-ins

$937.70

(No reviews yet) Write a Review

SKU:: FQMS-ZONF23
UPC:
Weight:: 245.30 Ounces
Shipping:: Calculated at Checkout

Current Stock:

Quantity:

Adding to cart… The item has been added

Description

Features & Benefits:

Full length replacement coil springs add additional ride height while maintaining ride quality
Heavy-duty track bar re-centers front axle, adds strength and limits lateral movement
High-strength, 1/4" steel construction corrects caster, improves tire clearance, and maximizes ground clearance
High-strength, black e-coated U-bolts
Rear lift block and longer U-bolts for easy installation and level stance

Associated Comments:

Check Your Rear Springs: If your vehicle is equipped with both a stock 4" rear block and a top mounted overload/helper spring, select the longer 18.5" Rear U-Bolts. Factory wheels fit when paired with factory / original equipment tire size. Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Lift Block Selection: This lift will require replacing your truck’s factory rear block to achieve a level stance; total height gained will vary depending on the size of the factory block. Mod's Required: Exhaust modification may be required to clear the front driveshaft on gas models. See installation instructions for more information. Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.