Zone 3" Suspension Lift Kit - ZONJ33

Zone 3" Suspension Lift Kit - ZONJ33

Zone Offroad

$320.95
(No reviews yet) Write a Review
SKU:
FQMS-ZONJ33
Weight:
58.00 Ounces
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
Designed as a complete system, this 3" lift includes everything necessary to properly lift your new Wrangler JL while allowing clearance for 35-37" tires. The extra ride height comes from a set of replacement JL-specific coil springs at each corner. These springs are engineered for additional ride height, improved suspension articulation, and to provide an custom-tailored "spring rate" to compensate for the mass of aftermarket wheels/tires and extra gear / off-roading equipment. In additional to replacement coil springs and shocks, this kit includes front lower control arm cam washers to correct caster alignment. Extended-length, heavy-duty front and rear sway bar links are supplied to correct sway bar geometry, while bump stop extensions limit suspension up-travel. Wrapping up this kit is a heavy-duty rear track bar bracket, used to re-center the rear axle and all the necessary hardware required to complete the full install.

Features & Benefits:

  • F/R coil springs to set ride height, maintain ride and improve articulation
  • Nitro-series gas shocks for smooth on/off-road performance
  • F/R extended sway bar links to correct sway bar operating angle
  • F/R bump stop extensions to properly limit suspension up travel
  • Front LCA cam washers to correct front end caster
  • Rear track bar bracket to recenter rear axle
  • Allows clearance for 35-37" tires

Associated Comments:

  • Stock wheels cannot be reinstalled w/o installing wheel spacers due to clearance issue to rear sway bar links.

Additional Attributes:

  • GTIN: 00810156367496
  • Accommodates Factory Wheels: No
  • Adjustable: No
  • Back Spacing: 4.5"
  • Finish: Powdercoat
  • Front Lift Height: 3"
  • Front Lift Method: Coil Springs
  • Installation Difficulty: 2 out of 5
  • Installation Time: 2.5 hrs
  • Lift Type: Lift Kit
  • Material: Steel
  • Max Tire Size: 35 x 12.5
  • Rear Lift Height: 3"
  • Rear Lift Method: Coil Springs
  • Required Tools: Torx Bit / Socket Set; Wrenches: Standard
  • Requires Metal Cutting: No
  • Requires Welding: No
  • Wheel Size: 17 x 9

Extended Information:

  • Emissions : 1
  • Life Cycle Status: Available To Order

Packaging:

  • Quantity of Each: 1
  • Package UOM: EA
  • Dimension: 48.0000 x 40.0000 x 24.0000 inches

PDF:

!