921655300
Jeep's JL Wrangler model is an impressive overhaul over previous designs, with modern appointments and considerably more power. Put the finishing touch on your new JL with enough clearance to easily run 35x12.50 tires with Rough Country's 3.5in Adjustable Control Arm Suspension Lift! This easy-to-install kit offers a total transformation in the look of your Jeep while maintaining a smooth, factory-like ride. Instantly gain an aggressive look and commanding stance that will truly set your JL apart from the pack! Rough Country's 3.5in Suspension Lift includes front and rear coil springs with a linear coil rate that promotes incredible handling while retaining more lift height under load than other designs. For an impressive ride quality both on and off-road, this kit also includes Rough Country's Adjustable Vertex Reservoir shocks. These 10-stage variable valving shocks feature a durable 18mm spring loaded piston rod, huge 54mm shock body, and reinforced seals for a long lifespan of smooth performance. For increased ground clearance and better off-road capability, this kit features a set of Rough Country's Adjustable Lower Control Arms. These beefy, heavily fortified lower control arms fare far better on the trail, able to withstand rocks and hazards that the factory arms can't! Jeep JL models lifted 3.5" or taller are prone to driveshaft damage at full suspension droop. The factory shaft does not have adequate clearance once lifted and will cause damage to the Rzeppa joint if the driveshaft spins while the suspension is fully flexed or articulated. Rough Country's Stage 2 Kit includes an aftermarket front CV driveshaft to eliminate this issue and allows you to take advantage of the full travel potential of your lifted Jeep JL! Rough Country's Jeep JL 3.5in kit features an easy installation process with only light drilling required for an easy, no-fuss assembly and includes a Lifetime Replacement Warranty for the ultimate peace of mind!
Features & Benefits:
- Easy Installation
- Increased ground clearance
- Includes upgraded CV Front Driveshaft Includes Front Adjustable Lower Control Arms Great handling and smooth ride quality Includes a Forged Adjustable Track Bar
Associated Comments:
- Does NOT fit Rubicon models Fits 4-Door models ONLY
Additional Attributes:
- GTIN: 00843030159368
- Front Components: Adjustable Track Bar, CV Dana 30 Front Driveshaft, Adjustable Lower Control Arms, Side Control Arm Drop Brackets, Lifted Coil Springs, Sway Bar Links, Bump Stops
- Install Time: 4-6 hours
- Rear Components: Lifted Coil Springs, Sway Bar Links, Track Bar Bracket, Bump Stops
- Tire Wheel and Offset Info: 35x12.50R17:17x8.5:5x5.0:+0:-; 35x12.50R17:17x8.5:5x5.0:+1:-; 35x12.50R17:17x9:5x5.0:-12:-; 35x12.50R17:17x9:5x5.0:+0:-; 35x12.50R17:17x9:5x5.0:+1:-; 35x12.50R18:18x8.5:5x5.0:+0:-; 35x12.50R18:18x8.5:5x5.0:+1:-; 35x12.50R18:18x9:5x5.0:+0:-; 35x12.50R18:18x9:5x5.0:+1:-; 35x12.50R18:18x10:5x5.0:-25:-; 35x12.50R18:18x10:5x5.0:-24:-; 35x12.50R18:18x10:5x5.0:-19:-; 35x12.50R18:18x10:5x5.0:-18:-; 35x12.50R20:20x9:5x5.0:-12:-; 295 60R20:20x9:5x5.0:-12:-; 35x12.50R20:20x9:5x5.0:+0:-; 35x12.50R20:20x9:5x5.0:+1:-; 295 60R20:20x9:5x5.0:+1:-; 35x12.50R20:20x10:5x5.0:-25:-; 35x12.50R20:20x10:5x5.0:-24:-; 35x12.50R20:20x10:5x5.0:-19:-; 295 60R20:20x10:5x5.0:-19:-; 35x12.50R20:20x10:5x5.0:-18:-; 295 60R20:20x10:5x5.0:-18:-; 35x12.50R22:22x10:5x5.0:-25:-; 35x12.50R22:22x10:5x5.0:-24:-; 35x12.50R22:22x10:5x5.0:-19:-; 35x12.50R22:22x10:5x5.0:-18:-
Extended Information:
- Emissions : Emissions Compliance Exempt
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: x x inches
